Maxtor AP-12 High-Performance Silicone Thermal Pad, 14.8W/m·K Thermal Conductivity, 120 × 120 × 1.0mm, Electrically Insulating, Cut-to-Fit for GPU VRAM, VRM, SSD & Laptop Cooling | Grey

Expert Features

• 14.8 W/m·K Thermal Conductivity: High-performance thermal interface designed to transfer heat efficiently between electronic components and compatible cooling surfaces.
• 1.0 mm Precision Thickness: Provides a pre-formed 1 mm thermal gap interface for components requiring this specific pad thickness.
• 120 × 120 mm Large Sheet: Generous square format allows users to cut multiple accurately sized pieces for different cooling applications.
• Electrically Insulating: Non-electrically conductive silicone material helps minimize electrical short-circuit risks near sensitive components.
• Flexible Silicone Construction: Conformable thermal material adapts to component and heatsink surfaces under appropriate mounting pressure.
• GPU VRAM & VRM Cooling: Designed for compatible graphics-card memory chips, voltage-regulation components, and heatsink contact areas.
• SSD & Motherboard Cooling: Suitable for applications involving M.2 SSDs, memory modules, chipsets, and integrated circuits with matching thermal gaps.
• Wide Temperature Range: Manufacturer-listed operating temperature range of −50°C to +250°C.
• Clean, Pre-Formed Installation: Cut to the required dimensions, remove the protective films, and position the pad without spreading thermal grease.
• Non-Curing Material: Silicone-based interface remains non-curing, supporting applications where a pre-formed thermal pad is required.
• Customizable Cut-to-Fit Design: Trim the sheet to match individual component footprints while preserving its original 1.0 mm nominal thickness.
• PC & Laptop Servicing: Suitable for desktop, laptop, gaming-PC, and electronics-repair work where the original assembly specifies a 1 mm thermal pad.

Expert Specs

Installation reminder: Use the 1.0 mm variant only where the original device requires this thickness. Incorrect thickness can prevent correct heatsink contact. Not an automatic replacement for thermal grease on bare CPU/GPU dies.