SKU: GS1010P

Cudy GS1010P 3.0 10-Port Gigabit PoE+ Switch with 8× 802.3af/at Ports, 2 Uplinks, 120W Supply, VLAN, 250m Extend Mode, PoE Watchdog, Metal Casing

$ 46.00

Description

Expert Features

  • 10 Gigabit Ethernet Ports: Connect up to 10 wired network devices through 10 RJ45 ports, including 8 Gigabit PoE ports and 2 Gigabit uplink ports.
  • PoE+ for Connected Devices: Ports 1–8 support IEEE 802.3af/at Mode A PoE, supplying up to 30W per port for compatible access points, IP cameras, and other PoE devices.
  • 120W Power Supply: Built-in 120W power supply supports the switch’s PoE operation; maximum power consumption excluding PoE is 10W.
  • PoE Watchdog: Optional Watchdog can reboot a connected client after it has been inactive for 5 minutes. Cudy advises against enabling it for devices with online auto-upgrade features.
  • Extended-Reach Mode: Extend mode supports transmission up to 250 meters on ports 1–8 with Cat 5e or higher cable, at 10 Mbps.
  • VLAN Mode: Optional VLAN mode isolates downlink clients from one another so they can communicate only with uplink devices.
  • Intelligent PoE Management: If the power budget is exceeded, the switch automatically disconnects the device that was powered on last.
  • Easy Status Checks: LEDs show power, link/activity for each Ethernet port, and PoE maximum status.
  • Metal, Flexible Placement: Shielded RJ45 ports and a metal casing; designed for desktop or wall-mounted installation.
  • Silent Cooling: Cudy describes the switch as having a silent cooling system.
  • Typical Setups: Suitable for surveillance, office networking, campus Wi‑Fi, access points, and digital signage.

Expert Specs

SpecificationDetails
Model/versionCudy GS1010P 3.0
Ethernet ports10 Gigabit RJ45 ports
PoE portsPorts 1–8; IEEE 802.3af/at, Mode A
Uplink ports2 Gigabit RJ45 uplink ports
Maximum PoE power per port30W
Power supply120W
Maximum power excluding PoE10W
PoE power managementIntelligent power management; disconnects the last powered device if the power budget is exceeded
Extend modeOn/off button; available on ports 1–8; up to 250m at 10 Mbps with Cat 5e or higher cable
VLAN modeOn/off button; available on ports 1–8; isolates downlink clients so they can communicate only with uplink devices
PoE WatchdogOn/off button; attempts to reboot connected clients inactive for 5 minutes; avoid enabling for clients with online auto-upgrade
IndicatorsPower; link/activity for each Ethernet port; PoE Max status
Maximum copper speed and distanceCat 3 or higher: 100m at 10 Mbps; Cat 5 or higher: 100m at 100 Mbps; Cat 5e or higher: 100m at Gigabit; Cat 5e or higher: 250m at 10 Mbps with Extend mode enabled
Switching capacity20 Gbps
Forwarding rate14.88 Mpps
MAC address table2,048 entries
Jumbo frame9 KB
Packet buffer1 Mbit
Power inputAC inlet; 100–240V~, 50/60Hz
Supported protocolsIEEE 802.3i 10BASE-T; 802.3u 100BASE-TX; 802.3ab 1000BASE-T; 802.3x Flow Control; 802.3af PoE; 802.3at PoE
GroundingThree-prong plug
ESD protectionIEC/EN 61000-4-2, Level 3; contact 6kV, air 8kV
Surge protectionIEC/EN 61000-4-5, Level 4; power DM 2kV, CM 4kV; RJ45 CM 4kV
Operating temperature0–40°C (32–104°F)
Storage temperature−40–70°C (−40–158°F)
Operating humidity10–90%, non-condensing
Storage humidity10–95%, non-condensing
Dimensions200 × 118 × 44mm (7.87 × 4.65 × 1.73in)
Product weight663.3g (23.4oz)
CasingMetal
InstallationDesktop or wall mount
Package contentsGS1010P, power cord, installation guide
Retail package dimensions249 × 207 × 60mm (9.8 × 8.15 × 2.36in)
Retail package weightEU: 1,078g (38.03oz)
Units per carton16
Carton net weightEU: 15.3kg (33.73lb)
Carton gross weightEU: 16.2kg (35.71lb)
Carton dimensions51.4 × 42.9 × 27.2cm (20.24 × 16.89 × 10.71in)