CUDY GS108D Gigabit RJ45 8-Port Desktop Switch

Expert Features

• Super-Fast Gigabit : Eight 10/100/1000 Mbps non-blocking Ethernet ports enable instant transferring of data without mutual interference.
• Extra Transmission Distance  : 170 meters of Gigabit transmission adding 70% longer distance compared to a standard switch, simplifies wiring for larger premises.
• Saves Power  : Reduce power consumption when Ethernet ports are idle, saving the electricity expenses on networking facilities.
• Wall Mounting : Provides two mounting holes on the bottom of the casing, catering to wall-mounting placement scenarios.
• A Plug and Play Network Hub : Connect Office Computers to Wired Network
• Boost Home Devices with Stable Ethernet :Compact enough to fit in most home network distribution boxes. The wave line and blue ports cast a modern aesthetic.

Expert Specs

Model Version
GS108D 4.0

Interfaces
Gigabit RJ45 Ports
8

LED

• Power
• Speed/Link/ACT of Each Ethernet Port

Power Input
DC Jack

Performance
Copper Speed and Distance

• Cat. 3 or higher cable: 100 meters at 10 Mbps
• Cat. 5 or higher cable: 100 meters at 100 Mbps
• Cat. 5e or higher cable: 170 meters at Gigabit

MAC Address Table
8192

Max Switching Capacity
16 Gbps

Max Forwarding Rate
11.904 Mpps

Jumbo Frame
15 KB

Packet Buffer
4 Mbit

Power
Basic Power Saving
True

Power Methods
DC

DC
5V 0.55A

Max Power Consumption
2.75W

Idle Power Consumption
2.2W

Switching
802.3 Protocols

• 802.3x Flow Control
• 802.3i 10BASE-T
• 802.3u 100BASE-T
• 802.3ab 1000BASE-T

L2 Features

• IGMP Snooping
• Loop Prevention

Reliability
Lightning/Surge Protection
2kV

ESD Contact Protection
4kV

ESD Air Protection
8kV

Environment
Operating Temperature: 0 ℃ ~ 40 ℃ (32 ℉ ~104 ℉)
Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉)
Operating Humidity: 10% ~ 90% non-condensing
Storage Humidity: 5% ~ 90% non-condensing

Mechanical
Dimension
138×61.5×24 mm
5.43×2.42×0.94 inches

Product Weight
89 g (3.14 oz.)

Casing Material
Plastic

Installation

• Desktop
• Wall-mount

Package Content

• GS108D
• Power Adapter
• Installation Guide

1*10/100/1000M Uplink Port switch poe support switch poe reverse and poe switch 8 port

 

 

 

 

PRODUCT INTRODUCTION:

RPOE switch has intelligent device Power management features solving a major problem of powering  the device for internet service provider.

This switch can be powered using remote power from customer using specially designed POE injector or any standard POE injector(24v DC,0.75amp).

This eliminates the needs of arranging power at building top (ups not require/No need to pay more money to customer or society).This saves lot of money of ISPs and improves uninterrupted service to the customer.

PRODUCT FEATURE:

REVERSE POE TECHNOLOGY:7Port 10/100+ 1G Reverse POE switch which has latest generation of fast Ethernet reverse POE switching technology. It contains 7*10/100 base T Reverse Poe ports (RPOE),1*10/100/1000 Base date Uplink Port&12V DC out for Powering ONU.

Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps (Up-link Port is 1000Mbps) and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation.

Supports Non-blocking Wire Speed: The switch forwards and receives traffic seamlessly with its Non-blocking wire- speed. Every port of the Switch supports speeds up to 200Mbps(Up-link Port is 2000Mbps)in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly.

Cascading support: switches can be cascaded for more users per Building (Up to 1 Main+3 switches )

Port base Isolation u/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Date of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other.

Over voltage Protection: Over voltage Protection is provided on each date port to eliminate damage due to connection of higher voltage(Higher than 24V DC. Up to 30V DC). By mistake if user connect more than 24V POE injector then switch will goes on power off mode and will start working again once this high voltage source is removed.

Over current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance and avoiding frequent change of blown fuse.

 

PRODUCT APPLICATION:

7*10/100 Base T Reverse POE Ports(RPOE) & 1*10/100/1000 Base T Uplink Port & 12V DC Power out for Powering ONU

PRODUCT SPECIFICTAION:

Product
RPOE 7*10/100M+1*1000M 12V2A out

Ethernet Connector
RJ45 Jacks(8 Ports)10/100Base-TX with Auto-MDIX

1*10/100/1000M Base T Data Uplink Port(port 1)

7*10/100 Base-Reverse POE Ports(Port 2to 8)Data + Power in

standards
IEEE STD. 802.3 10BASE T 10Mbps,Half/Full Duplex

IEEE STD. 802.3U 100BASE-TX,10/100Mbps,Half/Full Duplex

IEEE STD.802.3X FLOW CONTROL AND BACK PRESSURE

IEEE STD.802.3AZ Energy Efficient Ethernet

Protocols
CSMA/CD

Transmission Method
Store and forward

MAC ADDRESS
Support 8k MAC address

Packet Buffer

Maximum Forwarding Packet Length
Supports 9216-byte jumbo packet length forwarding at wire speed

Filtering/Forwarding Rates
1000Mbps Port – 148800pps

100Mbps Port – 14880pps

10Mbps Port – 14880pps

Network Cable
4-pair UTP/STP Cat 5 cable

LEDs
Link/Activity per Ethernet port

Power: On/Off for switch

Power Over Ethernet injector: Power
Supply(IN)
Power over Ethernet 24V @ 18W on SPARE pair ( to supply power to the HDV switch as well as a compatible POE device(e.g. CPE)

No. of Ethernet Ports that can Power
On the Switch & ONU
Any one /all of the seven Downlink Ports

Power Over Ethernet
Power over Ethernet injector on Four Pair Cable

DC Out
12V/2A DC OUT THROUGH DC jack for powering other Device like ONU

Ethernet Devices that can be powered
Single

CAT-5 Cable Date Lines
Pair 1:Pins 1/2,Pair 2:Pins3/6

CAT-5 Cable Power Lines
+VDC: Pins 4/5,-VDC:Pins 7/8

Power consumption
5 Watt (Poe injector) / 2 Watt (Switch)

Operating Temperature
0℃to 50℃

Storage environment
0℃ to 75℃

Operating Humidity
20% to 95% (non-condensing)

Dimension of Switch
125mm*70mm*25mm

Weight of Switch
0.45KG