LIAN LI UNIVERSAL 4-SLOTS VERTICAL GPU HOLDER KIT BLACK (FULL/MID)
COMPATIBLE WITH ATX CASES
The kit suits most of the ATX cases, including an O11 Dynamic EVO XL, O11 Dynamic EVO, O11 Dynamic, O11 Dynamic XL, LANCOOL III, LANCOOL II, LANCOOL 215, and Odyssey X.
Note: VG4-4X/ VG4-4W is not compatible with O11D EVO XL
O11D EVO
LANCOOL III
O11D XL
GEN 4.0 PCIE RISER CABLE
The PCIe 4.0 riser cable supports bit rate speeds of 16GT/s. While providing double the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backward compatible with a maximum transfer speed, offering great performance.
Note: Make sure the GPU PCIe Connector is fully inserted into the PCIe Riser Cable Socket and motherboard PCIe slot when powered off. Circuit short may occur and cause hardware damage if installed not properly.
ENHANCED SUPPORTING STRUCTURE
Designed with premium steel and a sturdy structure, the kit holds up to 4 slots thick GPU while eliminating possibilities of sagging and deformation.
THE DIFFERENCE OF V1 & V2 VERSION
Thanks to the enlarged slot on the side, the V2 version has better tolerance and will fit perfectly in the O11D EVO XL.
V1
V2
SPECIFICATIONS
PRODUCT NAME
Universal 4- Slots Vertical GPU kit (with Gen 4 riser)
MODEL
VG4-4-V2X
VG4-4-V2W
COLOR
Black
White
BRACKET DIMENSION
188mm (L) x 120mm (D) x 162 mm (H)
MATERIAL
STEEL
PCI-E RISER CABLE
Gen 4.0
CABLE LENGTH
200mm
CABLE INTERFACE
PCI-E X 16
COMPATIBILITY
O11 Dynamic EVO XL, O11 Dynamic EVO, O11 Dynamic, O11 Dynamic XL, LANCOOL III, LANCOOL II, LANCOOL 215, Odyssey X
LIAN LI UNIVERSAL 4-SLOTS VERTICAL GPU HOLDER KIT WHITE (FULL/MID)
Universal Vertical graphics card accessories
4 slots thick capacity
VG4-4 compatible with O11D EVO / O11D / O11DXL / LANCOOL III / LANCOOL II / LANCOOL 215/ Odyssey X
VG4-4-V2 compatible with O11D EVO / O11D / O11DXL / O11D EVO XL / LANCOOL III / LANCOOL II / LANCOOL 215 / Odyssey X
GEN 4.0 PCIE RISER CABLE
The PCIe 4.0 riser cable supports bit rate speeds of 16GT/s. While providing double the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backward compatible with a maximum transfer speed, offering great performance.
Note: Make sure the GPU PCIe Connector is fully inserted into the PCIe Riser Cable Socket and motherboard PCIe slot when powered off. Circuit short may occur and cause hardware damage if installed not properly.
ENHANCED SUPPORTING STRUCTURE
Designed with premium steel and a sturdy structure, the kit holds up to 4 slots thick GPU while eliminating possibilities of sagging and deformation.
THE DIFFERENCE OF V1 & V2 VERSION
Thanks to the enlarged slot on the side, the V2 version has better tolerance and will fit perfectly in the O11D EVO XL.
V1
V2
SPECIFICATIONS
PRODUCT NAME
Universal 4- Slots Vertical GPU kit (with Gen 4 riser)
MODEL
VG4-4X
VG4-4W
COLOR
Black
White
BRACKET DIMENSION
188mm (L) x 120mm (D) x 162 mm (H)
MATERIAL
STEEL
PCI-E RISER CABLE
Gen 4.0
CABLE LENGTH
200mm
CABLE INTERFACE
PCI-E X 16
COMPATIBILITY
O11D Dynamic EVO, O11 Dynamic,O11 Dynamic XL, LANCOOL III, LANCOOL II, LANCOOL 215, Odyssey X
Enables to connect additional 3 USB 2.0 devices to the motherboard
Installation friendly with the cable straps on the hub.
BOOST YOUR RGB DEVICE
Despite the limited number of USB headers on the motherboard, hosting 3 controllers in your system is achievable by converting one USB2.0 9-PIN header into three fool-proof design ports. You are now ready to connect 2 kinds of UNI FAN and a set STRIMER PLUS V2 at the same time.
LIAN LI Controller Compatible list:
UNI FAN SL Controller
UNI FAN AL Controller
UNI FAN SL-INF Controller
STRIMER L-Connect 3 Controller
UNI FAN SL V2 Controller
STABLE SIGNAL
The built-in chipset the HUB stabilizes the signal of all connecting devices, offering data transmission without interference.
SIMPLE INSTALLATION
Featuring Velcro straps on the HUB to hold the cables the other way around, benefiting tiny space for cable management.
Offering extra long cables for large cases to route the cables at the 2nd chamber.
Includes an adhesive magnetic pad to attach the HUB to the PC case.
LIAN LI GALAHAD II TRINITY SL-INF 360 WHITE CPU LIQUID COOLER
3 interchangeable pump looks that can be customized with L-Connect 3
Factory installed with ARGB daisy-chainable radiator fans or UNI FAN SL-INF
Pump motor speed goes up to 3200RPM
Includes a newly designed copper plate and creates straightened Liquid coolant pathway
45-degree tubing connector with tubes’ inner diameter increased to 7mm
CHOOSE PREFERABLE LOOK
The Galahad II Trinity series’ pump cap has three interchangeable designs, each with a unique look and two rings of colors that can be individually controlled with different lighting effects.
DUO- INFINITY
An aluminum housing cap with duo infinity mirror rings and a Lian Li logo at the center.
DAZZLE
An entirely shining pump cap that brings the most vivid lighting to your build.
SINK-HOLE
The combination of diffuser and infinity mirror creates the sinkhole effect.
HIGH DENSITY ALUMINUM RADIATOR
This 27mm thick radiator features single-wave radiator fins with 20 FPI (fins per inch), which is less airflow restrictive and can result in greater thermal performance.
DAISY-CHAINABLE ARGB FAN
The ARGB PWM fans can be daisy-chained by a single short cable which can be hidden inside the frame of the fan. The 120mm fan is 25mm thick and is equipped with fluid dynamic bearings for stable and quiet operations while effectively providing airflow to the radiator.
Maximum Static Pressure
3.26 mmH2O
Maximum Airflow
79.9 CFM
MOUNT IN ANY WAY
This innovative 45° tubing connector gives the tubes the freedom of 360° rotation, allowing the Galahad ll Trinity series to be installed in many different ways.
The Galahad ll Trinity series can be flexibly installed in ways such as:
Top Mount
Side Mount
Front Mount
Note: Do not apply heavy pressure or strike on the connector.
To make things even better, it also comes with a leather strap to help with organizing the tubes.
INSTALATION MADE EASY, FOR YOU
The Galahad II Trinity series introduces redesigned mounting backplates to provide a hassle-free installation to users while maintaining compatibility with most mainstream CPU sockets. The backplates have a one-piece design with fixed struts to make installation easier.
It also comes with a thermal paste control film and spreader to help ensure the right amount of thermal paste is applied for effective heat dissipation.
SEAMLESS SOFTWARE
Control and preview with precision the lighting effect and real time motor speed of the Galahad II Trinity Pump and fans with the L-Connect 3.
LIAN LI GALAHAD II TRINITY SL-INF 360 BLACK CPU LIQUID COOLER
3 interchangeable pump looks that can be customized with L-Connect 3
Factory installed with ARGB daisy-chainable radiator fans or UNI FAN SL-INF
Pump motor speed goes up to 3200RPM
Includes a newly designed copper plate and creates straightened Liquid coolant pathway
45-degree tubing connector with tubes’ inner diameter increased to 7mm
Pump motor speed goes up to 3200RPM
7 blade impeller for strong water flow
Copper plate seal with straightened coolant pathway, reducing resistance
Revised the fin thickness/ height/ distance for better diffusion of the coolant over the entire surface area of the copper plate.
CHOOSE PREFERABLE LOOK
The Galahad II Trinity series’ pump cap has three interchangeable designs, each with a unique look and two rings of colors that can be individually controlled with different lighting effects.
DUO- INFINITY
An aluminum housing cap with duo infinity mirror rings and a Lian Li logo at the center.
DAZZLE
An entirely shining pump cap that brings the most vivid lighting to your build.
SINK-HOLE
The combination of diffuser and infinity mirror creates the sinkhole effect.
HIGH DENSITY ALUMINUM RADIATOR
This 27mm thick radiator features single-wave radiator fins with 20 FPI (fins per inch), which is less airflow restrictive and can result in greater thermal performance.
DAISY-CHAINABLE ARGB FAN
The ARGB PWM fans can be daisy-chained by a single short cable which can be hidden inside the frame of the fan. The 120mm fan is 25mm thick and is equipped with fluid dynamic bearings for stable and quiet operations while effectively providing airflow to the radiator.
Maximum Static Pressure
3.26 mmH2O
Maximum Airflow
79.9 CFM
MOUNT IN ANY WAY
This innovative 45° tubing connector gives the tubes the freedom of 360° rotation, allowing the Galahad ll Trinity series to be installed in many different ways.
The Galahad ll Trinity series can be flexibly installed in ways such as:
LIAN LI GALAHAD II TRINITY SL-INF 240 WHITE CPU LIQUID COOLER
3 interchangeable pump looks that can be customized with L-Connect 3
Factory installed with ARGB daisy-chainable radiator fans or UNI FAN SL-INF
Pump motor speed goes up to 3200RPM
Includes a newly designed copper plate and creates straightened Liquid coolant pathway
45-degree tubing connector with tubes’ inner diameter increased to 7mm
MOUNT IN ANY WAY
This innovative 45° tubing connector gives the tubes the freedom of 360° rotation, allowing the Galahad ll Trinity series to be installed in many different ways.
The Galahad ll Trinity series can be flexibly installed in ways such as:
Top Mount
Side Mount
Front Mount
Note: Do not apply heavy pressure or strike on the connector.
To make things even better, it also comes with a leather strap to help with organizing the tubes.
INSTALATION MADE EASY, FOR YOU
The Galahad II Trinity series introduces redesigned mounting backplates to provide a hassle-free installation to users while maintaining compatibility with most mainstream CPU sockets. The backplates have a one-piece design with fixed struts to make installation easier.
It also comes with a thermal paste control film and spreader to help ensure the right amount of thermal paste is applied for effective heat dissipation.
LIAN LI UNI FAN SL-INF 120 INFINITY RGB x3 pack WHITE + CONTROLLER
Software controlled fan speed/ LED lighting
Only one cable is required for a cluster of fans
Embedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity
40 LEDs in each fan
Quick PIN connection to provide ease of installation
Low noise level at high RPM
Infinity mirror look all around
INFINITY MIRROR FAN
A combination of the original UNI FAN SL and AL with a touch of infinity mirror, the SL-Infinity fans glow clear with multi-layer effects from any visible angle.
CENTERED INFINITY MIRROR ARGB
The circular-shaped infinity mirror at the center of the fan is tuned to have multiple layers spaced 0.5mm apart.
SIDE FRAME ARGB
Following the iconic angular lighting style of SL fans, the SL-Infinity fans have 2 thin LED strips on both sides of the fan blade.
ALUMINUM TRIM SURROUNDED INFINITY MIRROR
Surrounding aluminum trims are located on both sides of the frame. The geometric shape of the infinity mirror follows the front ARGB lighting strip in a top and bottom pattern that creates a 3D indented look.
REAR RIM OF LED AROUND THE ALUMINUM LOGO
Inspired by AL fans, there is a bright ARGB rim of light around the LIAN LI logo at the rear.
UNPRECEDENTED MODULARITY
The 2nd generation of UNI FAN SL revisits the interlocking style that can connect up to 4 fans in a cluster and makes cable management simpler and improves compatibility with radiators fittings.
DAISY CHAIN FAN
A pin-to-pad contact point passes the signal and power through the fan cluster.
REMOVABLE KEYLOCK
The interlocking key on each fan is now removable to improve compatibility with radiators fittings.
REVERSIBLE CABLE MODULE
The cable module is now placed at the center of the fan and can switch orientation to reduce clearance issues with the radiator inlet and outlet.
IMPROVED PERFORMANCE
The SL-Infinity 120 features a 10% performance optimization compared to the SL120 which results in better airflow (61.3 CFM), higher static pressure (2.66 mmH2O), and a larger range of fan speed (0, 200 ~ 2100RPM) at lower noise levels (29 dB(A)).
LIAN LI UNI FAN SL-INF 120 FAN INFINITY RGB x1 120MM WHITE
Software controlled fan speed/ LED lighting
Only one cable is required for a cluster of fans
Embedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity
40 LEDs in each fan
Quick PIN connection to provide ease of installation
Low noise level at high RPM
Infinity mirror look all around
DAISY CHAIN FAN
A pin-to-pad contact point passes the signal and power through the fan cluster.
REMOVABLE KEYLOCK
The interlocking key on each fan is now removable to improve compatibility with radiators fittings.
REVERSIBLE CABLE MODULE
The cable module is now placed at the center of the fan and can switch orientation to reduce clearance issues with the radiator inlet and outlet.
IMPROVED PERFORMANCE
The SL-Infinity 120 features a 10% performance optimization compared to the SL120 which results in better airflow (61.3 CFM), higher static pressure (2.66 mmH2O), and a larger range of fan speed (0, 200 ~ 2100RPM) at lower noise levels (29
LIAN LI UNI FAN SL-INF 120 INFINITY RGB x3 pack BLACK + CONTROLLER
Software controlled fan speed/ LED lighting
Only one cable is required for a cluster of fans
Embedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity
40 LEDs in each fan
Quick PIN connection to provide ease of installation
Low noise level at high RPM
Infinity mirror look all around
INFINITY MIRROR FAN
A combination of the original UNI FAN SL and AL with a touch of infinity mirror, the SL-Infinity fans glow clear with multi-layer effects from any visible angle.
CENTERED INFINITY MIRROR ARGB
The circular-shaped infinity mirror at the center of the fan is tuned to have multiple layers spaced 0.5mm apart.
SIDE FRAME ARGB
Following the iconic angular lighting style of SL fans, the SL-Infinity fans have 2 thin LED strips on both sides of the fan blade.
ALUMINUM TRIM SURROUNDED INFINITY MIRROR
Surrounding aluminum trims are located on both sides of the frame. The geometric shape of the infinity mirror follows the front ARGB lighting strip in a top and bottom pattern that creates a 3D indented look.
REAR RIM OF LED AROUND THE ALUMINUM LOGO
Inspired by AL fans, there is a bright ARGB rim of light around the LIAN LI logo at the rear.
UNPRECEDENTED MODULARITY
The 2nd generation of UNI FAN SL revisits the interlocking style that can connect up to 4 fans in a cluster and makes cable management simpler and improves compatibility with radiators fittings.
DAISY CHAIN FAN
A pin-to-pad contact point passes the signal and power through the fan cluster.
REMOVABLE KEYLOCK
The interlocking key on each fan is now removable to improve compatibility with radiators fittings.
REVERSIBLE CABLE MODULE
The cable module is now placed at the center of the fan and can switch orientation to reduce clearance issues with the radiator inlet and outlet.
Unlike the previous Magic Mouse, the Magic Mouse 2 has a built-in rechargeable lithium-ion battery.
WHAT’S INCLUDED
1 – Apple Magic Mouse 2
1 – Lightning to USB Cable, 1m
TECH SPECS
Connection: Bluetooth Wireless
Tracking Method: Laser
Maximum DPI: 1300
Power Source: Internal lithium-ion
Color: Space Gray
Brand Apple
Colour Grey
Connectivity technology Wireless, Bluetooth
Special features Wireless, Rechargeable
Movement detection technology Laser
Number of buttons 1
Hand orientation Ambidextrous
Compatible devices Laptop, Personal Computer
Item weight 220 Grams
Operating system Linux, Windows XP
About this item
Magic Mouse 2 is completely rechargeable, so you’ll eliminate the use of traditional batteries.
It’s lighter, has fewer moving parts thanks to its built-in battery and continuous bottom shell, and has an optimized foot design — all helping Magic Mouse 2 track easier and move with less resistance across your desk.
And the Multi-Touch surface allows you to perform simple gestures such as swiping between web pages and scrolling through doents.
Magic Mouse 2 is ready to go right out of the box and pairs automatically with your Mac.
Apple Magic Mouse: Wireless, Bluetooth, Rechargeable. Works with Mac or iPad; Multi-Touch Surface – White
About Apple Magic Mouse 2 Wireless Bluetooth
WIRELESS, RECHARGEABLE CONVENIENCE — Magic Mouse connects wirelessly to your device via Bluetooth.
the rechargeable internal battery means no loose batteries to replace.
WORKS WITH MAC OR IPAD — It’s ready to go right out of the box and pairs quickly with your Mac or iPad so you can get to work right away.
SWIPE AND SCROLL ON THE MULTI-TOUCH SURFACE — The Multi-Touch surface allows you to perform simple gestures such as swiping and scrolling. And an optimized foot design lets Magic Mouse glide smoothly across your desk.
GO WEEKS WITHOUT CHARGING — The incredibly long-lasting internal battery will power your Magic Mouse for about a month or more between charges.
Comes with a woven USB-C to Lightning Cable that lets you pair and charge by connecting to a USB-C port on your Mac or iPad.
SYSTEM REQUIREMENTS — Requires a Bluetooth-enabled Mac with OS X 10.11 or later or an iPad with iPadOS 13.4 or later.
Size and Weight of Apple Magic Mouse Multi-Touch Surface Rechargeable
Height: 2.16 cm (0.85 inches)
Width: 5.71 cm (2.25 inches)
Depth: 11.35 cm (4.47 inches)
Weight: 0.099 kg (0.22 pounds)*
General Apple Magic Mouse 3 Wireless Bluetooth
Multi-Touch
Connections and Expansion
Bluetooth
Lightning port
Wireless
System Requirements
Bluetooth-enabled Mac with OS X 10.11 or later
iPad with iPadOS 13.4 or later
Details of the items in the package (Number of Units/Quantity)
UGreen Spiral Cable Zipper Organizer Tube 3M Black | 30818
Diameter: 20 mm – 78.5 mm
1.5 m length (can be cut)
Easy to use cable placement in the cover
Flexible cable grille, designed to organize cables connected to various
types of equipment, computers, TV sets, Hi-Fi towers or other
UGreen Spiral Cable Zipper Organizer Tube 3M Black | 30819
Diameter: 20 mm – 78.5 mm
3 m length (can be cut)
Easy to use cable placement in the cover
Flexible cable grille, designed to organize cables connected to various
types of equipment, computers, TV sets, Hi-Fi towers or other
TPLINK DECO S7 3 PACK AC1900 WHOLE HOME MESH WIFI SYSTEM
AC1900 Whole Home Mesh Wi-Fi System
1900 Mbps WiFi Speed – Enjoy binge watching your favorite series in 4K with combined speeds of up to 1900 Mbps (600 Mbps on 2.4 GHz and 1300 Mbps on 5 GHz ) with 3×3 MU-MIMO technology.† ‡
Connect 100+ Devices – Deco handles traffic from even the busiest of networks, providing lag-free connections for over 100 devices.†
Boosted Seamless Coverage – With advanced Deco Mesh Technology, units work together to form a unified network with a single network name. Devices automatically switch between Decos as you move through your home for the fastest possible speeds. §
Full Gigabit Ethernet – 3× Gigabit WAN/LAN Ethernet ports provide solid internet access at high speeds.△
Robust Parental Controls – Limit online time and block inappropriate websites according to unique profiles you create for each family member.
Plain Paper
High Resolution Paper (HR-101N)
Photo Paper Plus Glossy II (PP-201)
Photo Paper Pro Luster (LU-101)
Photo Paper Plus Semi-gloss (SG-201)
Glossy Photo Paper “Everyday Use” (GP-501)
Matte Photo Paper (MP-101)
Envelope
WD_BLACK 2TB SN850X NVMe Internal Gaming SSD Solid State Drive – Gen4 PCIe, M.2 2280, Up to 7,300 MB/s – WDS200T2X0E
About this item
Get the ultimate gaming edge over your competition with insane speeds up to 7,300 MB/s(1) for top-level performance and radically short load times. .date transfer rate:7300.0 megabytes_per_second.Specific uses: Gaming
A range of capacities from 1TB to 4TB(2) means you get to keep more of today’s games that can take up 200GB(2) or more of storage.
The WD_BLACK Dashboard monitors your drive’s health, controls your RGB style and can automatically detect games to turn on Game Mode 2.0 (Windows only).
Predictive Loading, Overhead Balancing, and Adaptive Thermal Management features come to the SN850X to juice up your gaming performance.(3)
Supports future games developed for Microsoft’s DirectStorage technology for faster load times.
(1) Based on read speed. 1 MB/s = 1 million bytes per second. Based on internal testing; performance may vary depending upon host device, usage conditions, drive capacity, and other factors.
(2) 1GB = 1 billion bytes and 1TB = 1 trillion bytes. Actual user capacity may be less depending on operating environment.
(3) Requires the WD_BLACK Dashboard (Windows only). Compatible with Computer with M.2 (M-key) port, capable of taking M.2 2280 form factor Windows 11, 10, 8.1, PlayStation 5 (Heatsink model only)4
HyperX Fury RGB 32GB 3200MHz DDR4 CL16 DIMM Single Stick KF432C16BBA/32 ” EDITED FROM KIT SELLING SEPARATE”
From the manufacturer
HyperX
Unleash your style. Unleash your FURY.
DDR4 RGB Memory up to 3733MHz
FURY DDR4 RGB is XMP-ready and available in 2400MHz–3733MHz speeds, CL15–17 latencies, single module capacities of 8GB and 16GB, and kit capacities of 16GB–64GB to give you a performance boost for your gaming, video editing, and rendering.
Patent Pending HyperX Infared Sync Technology
USPTO, Date of application: 4/20/2018, Application No.: 15/959,162
Customizable RGB lighting with aggressive styling
Give your battle station a stylish upgrade thanks to FURY DDR4 RGB’s updated heat spreader and customizable smooth, stunning RGB effects. Use the powerful HyperX NGenuity 2 software or motherboard manufacturer’s software to create your own look.
HyperX Infrared Sync Technology
RGB effects stay synced thanks to HyperX’s infrared sync technology.
CORSAIR Dominator Platinum RGB 64GB (2x32GB) RAM Kit is taken out of the Original “CMT128GX4M4C3200C16” Kit which comes in 4x 32GB Format , however , we are selling 2x 32GB SEPARATELY
EXPERT FEATURES
Iconic and refined DOMINATOR PLATINUM design perfectly complements the world’s best PCs, for unmistakable high-end system builds.
Hand-sorted, tightly-screened memory chips ensure high frequency performance and tight response times, with overclocking headroom to spare.
DOMINATOR PLATINUM RGB’s construction combines precision die-casting and anodization to create premium memory that’s built to last.
12 ultra-bright, individually addressable CAPELLIX RGB LEDs per module illuminate your PC with spectacular customizable lighting and low power consumption.
Patented DHX cooling system embeds the heatspreader directly into the PCB, pulling heat away from the modules and allowing DOMINATOR PLATINUM RGB to stay cool even under extreme loads.
A custom high-performance PCB guarantees signal quality and stability, for superior overclocking ability.
Powerful CORSAIR iCUE software brings your system to life with dynamic RGB lighting control synchronized across all your iCUE compatible products, and keeps you informed with real-time temperature and frequency readings.
HyperX Cloud Stinger™ is the ideal headset for gamers looking for lightweight comfort, superior sound quality and added convenience. At just 275 grams, it’s comfortable on your neck and its ear cups rotate in a 90-degree angle for a better fit. Its 50mm directional drivers position sound directly into the ear for audio precision and gaming-grade sound quality. Cloud Stinger also includes 2 years of DTS® Headphone:X®[2] Spatial Audio for enhanced immersion and positional audio cues to keep you on top of your game. For ultimate comfort in prolonged gaming sessions, it features high-quality HyperX signature memory foam. Its adjustable steel slider, intuitive volume control on headset ear cup and swivel-to-mute noise-cancellation microphone make it easy to use and multi-platform compatibility lets you enjoy the same comfort and enhanced audio experience on PCs or consoles.
Technical Specs
Headset Specifications
Weight: 0.6lb
Weight with microphone: 0.6lb
Cable Length (imperial) and type: Headset cable, PC extension cable