SKU: AP12-85*45-0.5MM
Whopping Discounts on Full PC Builds!

Maxtor AP-12 High-Performance Silicone Thermal Pad, 14.8W/m·K Thermal Conductivity, 85 × 45 × 0.5mm, Electrically Insulating, Cut-to-Fit for GPU VRAM, VRM, SSD & Laptop Cooling |  Grey

$ 5.00

Description

Expert Features

  • 14.8 W/m·K Thermal Conductivity: High-performance thermal interface material designed to transfer heat between electronic components and compatible cooling surfaces.
  • 0.5 mm Precision Thickness: Ultra-thin silicone pad for cooling assemblies specifically requiring a 0.5 mm thermal gap interface.
  • 85 × 45 mm Compact Sheet: Convenient rectangular format for smaller thermal-management applications and precision electronics repairs.
  • Electrically Insulating: Non-electrically conductive silicone helps reduce short-circuit risks when installed near sensitive electronic components.
  • High Compressibility: Soft silicone construction conforms to minor surface irregularities under suitable heatsink mounting pressure.
  • GPU VRAM & VRM Cooling: Suitable for compatible graphics-card memory chips and voltage-regulation components requiring this specific thickness.
  • SSD & Motherboard Applications: Can be trimmed for suitable M.2 SSDs, motherboard chipsets, memory components, and integrated circuits.
  • Wide Operating Temperature Range: Manufacturer-rated temperature stability from −50°C to +250°C.
  • Clean, Pre-Formed Installation: Cut to the required dimensions, remove protective films, and position without spreading thermal grease.
  • Non-Curing Silicone Formula: Flexible thermal interface material designed to remain non-curing rather than hardening into a rigid adhesive layer.
  • Custom Cut-to-Fit Design: Easily trim the 85 × 45 mm sheet to match individual component footprints and contact surfaces.
  • Laptop & Desktop Servicing: Practical for compatible gaming PCs, graphics cards, laptops, workstations, and electronics repair.

Expert Specs

SpecificationDetails
BrandMaxtor
ModelAP-12
Product TypeHigh-Performance Thermal Pad
MaterialSilicone Thermal Interface Material
Thermal Conductivity14.8 W/m·K
Sheet Length85 mm
Sheet Width45 mm
Sheet Dimensions85 × 45 mm
Thickness0.5 mm
ShapeRectangular, Cut-to-Fit Sheet
ColorGray
Electrical PropertiesElectrically Insulating / Non-Conductive
Curing BehaviorNon-Curing
CompressibilityHigh Compressibility
Operating Temperature−50°C to +250°C
Hardness30–55 Sc (Manufacturer Notation)
Installation MethodCut, Remove Protective Films, Position
Primary ApplicationsGPU VRAM/GDDR, VRM, Motherboard Components
Additional ApplicationsM.2 SSDs, Chipsets, Memory Modules, ICs
Cooling Surface CompatibilitySuitable Heatsinks, Including Aluminum
Manufacturer-Listed Shelf Life5 Years
Manufacturer-Listed ComplianceRoHS, REACH, ISO (Standard Unspecified)

Installation Note: The 0.5 mm thickness must match the original thermal interface gap. A pad that is too thin may not contact both surfaces, while one that is too thick can interfere with heatsink seating. This pad is not automatically a replacement for thermal paste directly on a CPU or GPU die.