SKU:
AP12-120*20-1.5MM
Whopping Discounts on Full PC Builds!
Maxtor AP-12 High-Performance Silicone Thermal Pad, 14.8W/m·K Thermal Conductivity, 120 × 20 × 1.5mm, Electrically Insulating, Cut-to-Fit for GPU VRAM, VRM, SSD & Laptop Cooling | Grey
$ 4.50
Share:
Description
Expert Features
- 14.8 W/m·K Thermal Conductivity: High-performance silicone thermal interface designed to transfer heat between electronic components and compatible heatsinks.
- 1.5 mm Precision Thickness: Pre-formed thermal pad for cooling assemblies requiring a 1.5 mm gap-filling interface.
- 120 × 20 mm Long Strip: Slim rectangular format with an exact 6:1 length-to-width ratio, ideal for appropriately sized elongated thermal contact areas.
- Electrically Insulating: Non-electrically conductive silicone construction helps protect sensitive electronic components from accidental electrical contact through the pad.
- Flexible Silicone Material: Conformable composition helps accommodate small surface irregularities under appropriate heatsink mounting pressure.
- GPU VRAM & VRM Cooling: Suitable for graphics-card memory chips and voltage-regulation components that require a compatible 1.5 mm thermal interface.
- M.2 SSD & Motherboard Applications: Can be trimmed for compatible SSD cooling surfaces, chipsets, memory modules, and integrated circuits.
- Wide Operating Temperature Range: Manufacturer-listed operating range of −50°C to +250°C.
- Clean, Pre-Formed Installation: Cut to size, remove protective liners, and position without spreading conventional thermal grease.
- Non-Curing Silicone Construction: Designed to remain a non-curing thermal interface rather than hardening into a rigid layer.
- Custom Cut-to-Fit Design: Trim the narrow strip into smaller pieces to match individual component footprints.
- PC & Laptop Thermal Servicing: Practical for compatible gaming PCs, graphics cards, laptops, workstations, and electronic-device repairs.













Expert Specs
| Brand | Maxtor |
|---|---|
| Model | AP-12 |
| Product Type | High-Performance Thermal Pad |
| Material | Silicone Thermal Interface Material |
| Thermal Conductivity | 14.8 W/m·K |
| Length | 120 mm |
| Width | 20 mm |
| Sheet Dimensions | 120 × 20 mm |
| Thickness | 1.5 mm |
| Aspect Ratio | 6:1 |
| Shape | Long Rectangular Strip |
| Color | Gray |
| Electrical Properties | Electrically Insulating / Non-Conductive |
| Material Conformability | Flexible / Compressible |
| Curing Behavior | Non-Curing |
| Operating Temperature | −50°C to +250°C |
| Hardness | 30–55 Sc (Manufacturer Notation) |
| Installation Method | Cut, Remove Protective Films, Position |
| Primary Applications | GPU VRAM/GDDR, VRM, Motherboard Components |
| Additional Applications | M.2 SSDs, Memory Modules, Chipsets, Integrated Circuits |
| Compatible Cooling Surfaces | Suitable Heatsinks, Including Aluminum |
| Manufacturer-Listed Shelf Life | 5 Years |
| Manufacturer-Listed Compliance | RoHS, REACH, ISO (Specific ISO Standard Unspecified) |
Installation note: Match the 1.5 mm thickness to the original cooling assembly. A thinner pad may fail to make contact, while a thicker one may interfere with heatsink seating. Do not automatically substitute this thermal pad for paste on a bare CPU or GPU die.
You may also like
Thermal Paper Roll, 80 mm Wide × 40 mm Diameter, for Compatible Thermal Printers Supporting This Roll Size
SKU:
PAPER-ROLL-80*40
Call for PricePNY GeForce RTX 5070 OC 12GB GDDR7 Overclocked GPU With Triple Fan Cooling & Stealth Mode , DLSS 4, Ray Tracing, PCIe 5.0, 6144 CUDA , 2587 MHz Boost, Blackwell Architecture, 4K/8K Ready, Metal Backplate, 250W TDP | REFURBISHED
SKU:
CR507012TFXPB1-O
ASUS TUF Gaming GeForce RTX 5070 Ti 16GB GDDR7 OC ,2610MHz OC Boost, 8960 CUDA, 28Gbps PCIe 5.0 256-Bit 3.125 Slot, Triple Axial-Tech Fan, DLSS 4 Ray Tracing, 850W , ARGB Aura Sync | BLACK
SKU:
ASUS-TUF-5070TI-BK















Keyboard
OFFICE KEYBOARD
Mouse
OFFICE MOUSE
Wrist Rest
Apex seat