SKU:
AP12-120*120-2MM
Whopping Discounts on Full PC Builds!
Maxtor AP-12 High-Performance Silicone Thermal Pad, 14.8W/m·K Thermal Conductivity, 120 × 120 × 2.0mm, Electrically Insulating, Cut-to-Fit for GPU VRAM, VRM, SSD & Laptop Cooling | Grey
$ 16.00
Share:
Description
Expert Features
- 14.8 W/m·K Thermal Conductivity: High-performance silicone thermal interface material helps transfer heat from electronic components to compatible cooling surfaces.
- 2.0 mm Precision Thickness: Pre-formed thermal pad for assemblies specifically requiring a 2 mm gap-filling interface between components and heatsinks.
- 120 × 120 mm Large Sheet: Generous square format can be cut into multiple smaller pieces for custom thermal-management and repair applications.
- Electrically Insulating: Non-electrically conductive silicone formulation is suitable for use around sensitive electronic components.
- Flexible Silicone Construction: Conformable material helps accommodate minor surface irregularities under suitable heatsink mounting pressure.
- GPU VRAM & VRM Cooling: Suitable for compatible graphics-card memory chips and voltage-regulation components requiring a 2 mm thermal interface.
- SSD & Motherboard Cooling: Can be trimmed for compatible M.2 SSDs, motherboard chipsets, memory modules, and integrated circuits.
- Wide Operating Temperature Range: Manufacturer-rated operating range of −50°C to +250°C for demanding electronic thermal-management applications.
- Clean, Pre-Formed Installation: Cut to size, remove protective films, and position without spreading conventional thermal grease.
- Non-Curing Material: Silicone-based formulation remains non-curing rather than hardening into a rigid adhesive layer.
- Custom Cut-to-Fit Design: Trim the sheet for individual components while retaining the original 2.0 mm nominal thickness.
- PC & Laptop Thermal Servicing: Practical for gaming-PC, graphics-card, laptop, workstation, and electronics servicing where a 2 mm thermal pad is specified.




Expert Specs
| Specification | Details |
|---|---|
| Brand | Maxtor |
| Model | AP-12 |
| Product Type | High-Performance Thermal Pad |
| Material | Silicone Thermal Interface Material |
| Thermal Conductivity | 14.8 W/m·K |
| Length | 120 mm |
| Width | 120 mm |
| Sheet Dimensions | 120 × 120 mm |
| Thickness | 2.0 mm |
| Shape | Square, Cut-to-Fit Sheet |
| Color | Gray |
| Electrical Properties | Electrically Insulating / Non-Conductive |
| Curing Behavior | Non-Curing |
| Operating Temperature | −50°C to +250°C |
| Hardness | 30–55 Sc (Manufacturer Notation) |
| Installation Method | Cut, Remove Protective Films, Position |
| Primary Applications | GPU VRAM/GDDR, VRM, Motherboard Components |
| Additional Applications | M.2 SSDs, Memory Modules, Chipsets, ICs |
| Cooling Surface Compatibility | Suitable Heatsinks, Including Aluminum |
| Manufacturer-Listed Shelf Life | 5 Years |
| Manufacturer-Listed Certifications | RoHS, REACH, ISO (Standard Unspecified) |
Installation Note: Match the replacement pad thickness to the equipment’s original design. A pad that is too thin may not contact the heatsink; a pad that is too thick can interfere with correct cooler mounting. Do not assume this pad replaces thermal paste on bare CPU or GPU dies.
You may also like
Dell 5501 Used Laptop, 9th Gen Intel Core i7, 16GB RAM, 512GB Storage, 15-Inch Display, Black
SKU:
DELL-5501-USED
$ 315.00Dell 3550 Used Laptop, 10th Gen Intel Core i5, 16GB RAM, 512GB Storage, 15-Inch Display, Silver
SKU:
DELL-3550-USED
$ 330.00










Keyboard
OFFICE KEYBOARD
Mouse
OFFICE MOUSE
Wrist Rest
Apex seat