SKU: FS1006P-V3.0

Cudy FS1006P V3.0 6-Port 10/100Mbps PoE+ Switch, 4× IEEE 802.3af/at PoE Ports, 2× Uplink Ports, 65W Supply, 250m Extend Mode, VLAN, Watchdog, Metal Desktop/Wall-Mount Housing

$ 17.00

Description

Expert Features

  • Six-Port Fast Ethernet Layout : Four powered 10/100Mbps PoE+ ports handle cameras, access points, or compatible smart-building devices, while two dedicated Fast Ethernet uplinks connect the switch to a router, recorder, or core network.
  • IEEE 802.3af/at PoE Support : Ports 1–4 deliver standards-based Mode A PoE, supporting compatible powered devices without separate local power adapters.
  • 65W Total Power Supply : A practical PoE power budget for compact surveillance and smart-building installations without dragging a giant enterprise switch into the job.
  • Up To 30W Per PoE Port : Each PoE port can provide up to 30W, subject to the switch’s total available power budget.
  • 250-Meter Extend Mode : Ports 1–4 can reach up to 250 meters at 10Mbps using Cat.5e or better cabling when Extend Mode is enabled.
  • VLAN Isolation Mode : VLAN Mode isolates PoE ports 1–4 from one another while preserving uplink communication, helping reduce unnecessary broadcast traffic and improve deployment security.
  • Automatic PoE Watchdog : Under VLAN or Extend Mode, the switch attempts to reboot connected clients that remain inactive for five minutes.
  • Intelligent Power Management : When the total PoE demand exceeds the available budget, the switch automatically disconnects the most recently powered device instead of crashing the complete network.
  • Silent Operation : Ideal for offices, shops, control rooms, reception areas, and home-surveillance installations where noisy networking hardware is absolutely not invited.
  • Metal Housing With Flexible Installation : The durable 200 × 118 × 44mm chassis supports desktop placement or wall mounting.
  • Electrical Protection : Level 3 ESD and Level 4 surge protection help the switch survive electrically demanding networking environments.
  • Clear Front-Panel Control : Dedicated Power and Link/ACT indicators plus a physical Default/Extend/VLAN DIP switch make deployment and troubleshooting fast and straightforward.

 Expert Specs

SpecificationValue
BrandCudy
Model VersionFS1006P V3.0
Product Type6-Port 10/100Mbps PoE+ Switch
Total RJ45 Ports6 × 10/100Mbps RJ45
PoE PortsPorts 1–4
Uplink PortsPorts 5–6
PoE Port Speed10/100Mbps
Uplink Port Speed10/100Mbps
PoE ModeMode A
PoE StandardsIEEE 802.3af, IEEE 802.3at
Maximum Power Per PoE Port30W
Total Power Supply65W
Maximum Power Excluding PoE1W
PoE PriorityIntelligent power management automatically disconnects the most recently powered device when total demand exceeds the available budget
Shielded RJ45 PortNot specified in the supplied information
Extend Mode PortsPorts 1–4
VLAN Mode PortsPorts 1–4
Watchdog AvailabilityVLAN Mode or Extend Mode
Watchdog BehaviourAttempts to reboot connected clients that have remained inactive for five minutes
Watchdog Configuration NoteDisable automatic firmware-upgrade functions on connected client devices
Physical Mode ControlDefault/Extend/VLAN DIP switch
LED IndicatorsPower and Link/ACT for each Ethernet port
Standard Distance At 10MbpsUp to 100m with Cat.3 or higher cable
Standard Distance At 100MbpsUp to 100m with Cat.5 or higher cable
Extended DistanceUp to 250m at 10Mbps with Cat.5e or higher cable
Extended-Distance RequirementAvailable only on Extend Mode ports while Extend Mode is enabled
MAC Address Table2,048 entries
Maximum Switching Capacity1.2Gbps
Maximum Forwarding Rate0.8928Mpps
Jumbo Frame2KB
Packet Buffer768Kbit
Ethernet ProtocolsIEEE 802.3i 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3x Flow Control
PoE ProtocolsIEEE 802.3af, IEEE 802.3at
PoE ManagementIntelligent Power Management
Power Input TypeAC inlet
Power MethodAC
Power Input100–240V AC, 50/60Hz
Grounding MethodsThree-prong plug and grounding point
ESD ProtectionIEC/EN 61000-4-2, Level 3; contact discharge 6kV, air discharge 8kV
Surge ProtectionIEC/EN 61000-4-5, Level 4; power DM 2kV, power CM 4kV, RJ45 CM 4kV
Operating Temperature0°C to 40°C / 32°F to 104°F
Storage Temperature-40°C to 70°C / -40°F to 158°F
Operating Humidity10% to 90%, non-condensing
Storage Humidity10% to 95%, non-condensing
Dimensions200 × 118 × 44mm
Dimensions In Inches7.87 × 4.65 × 1.73in
Product Weight568.5g / 20.05oz
Housing MaterialMetal
InstallationDesktop or wall-mount
Operating NoiseSilent operation
Recommended ApplicationsSurveillance and smart-building projects