Start typing to see products you are looking for.

Shopping cart


+961 70184056   +961 01657725





Show sidebar

1600W Modular Power Supply For 6 GPU

USD 145.00 ---ONLY---
  • معيار الطاقة: ATX 12 فولت 138A
  • 1600W Modular Power Supply For 6 GPU Eth Rig Ethereum Coin Mining Miner 90 Gold

  • الطاقة المقدرة: 1600 واط
  • الطاقة القصوى: 1800 واط
  • شهادة 80 PLUS: ميدالية ذهبية
  • الإدخال: 110 فولت أو 220 فولت
  • الإخراج: 12V
  • وحدة المعالجة المركزية امدادات الطاقة: 4 + 4PIN
  • بطاقة الفيديو 12 فولت: 6 + 2PIN * 12
  • SATA رقم المنفذ: 7
  • D واجهة: 5
  • 3C رقم الشهادة: 2016010907906520
  • PFC نوع: نشط PFC
  • وزن المنتج: 2.8 كجم

    هناك PSU هي 2 الفولتية: 160-240 فولت و 100-240 فولت ، وسوف نرسل امدادات الطاقة المقابلة وفقا لبلدك ، يمكنك أيضا الإشارة مباشرة إلى الجهد المطلوب ، شكرا لك!


1850W ATX Modular Mining PC Power Supply 6 GPU

USD 127.00 ---ONLY---

T.F.SKYWINDINTL 1800w Power Supply RX480 PSU Asic Bitcoin Miner Power Supply 1800W Atx Pico PSU Mining ETH ETC XMR ZEC BTB BTC


20+4P *1
CPU 4+4P *1
6+2P*  12
IDE*  5
SATA  *8
1.Support 6 pieces graphics card(Power is lower than 1800W)
2.1800W power supply, high efficiency,very quiet,stable performance.
3.With new big capacitor and big magnetic ring material, the performance is very stable.
4:with one year warrety
Package :
1800w psu *1
power tester *1
power cord *1
Please pay attention :
1: this psu is design forminer Mining,it can be used in normal computer but it will a little  noisy when you use in normal computer , if you want a very quiet computer psu , do not buy this one  and contact our sales to advise you one .

1Pcs Newest Riser VER012 MAX USB 3.0 PCI-E MINING

USD 8.00 ---ONLY---


High-power GPU

Please do not use SATA cables for power supply

SATA cables cannot carry high current continuously

Usually the origin of the fire

Please to use 18AWG 6PIN cable for power supply


1. Newest VER012 MAX Mining Super Version


2. Using 60cm USB 3.0 cable as extender cable, premium quality and super speed.


3. With 10x FP solid capacitors, making graphics power supply more stable and secure.


5. Gold plated contacts for better connectivity and long life.


6. Compatible with 1x,2x,4x,8x,16x PCI-E slot of the motherboard.


8. No driver needed


9. Dedicated for bitcoin mining


10. Power via two different 6-PIN inputs onboard the riser.


11. 10 LED lights onboard the main board, and one LED light on the 1X chip board.


12. Led can help miner to better monitor faults, very convenient, fast and stable!

Package Included:

Large motherboard*1

Small motherboard*1

1*USB adapter cable


USD 223.00 ---ONLY---

Biostar Motherboard TB250-BTC PRO Core LGA1151

USD 155.00 ---ONLY---

 Here we adopt 12 graphics cards and TB250-BTC PRO for this crypto mining hardware installation.

Hardware Requirement
  • Total 12 graphics cards
    AMD graphics cards support a maximum of 12 cards.(driver 17.11.1 version later)
    NVIDIA graphics cards only support a maximum of 8 cards due to driver limitation.
  • Memory: 16GB
  • Power supply: 1200W x2 (depend on the power consumption of graphics cards)
OS / Software Requirement
BIOS setting & Driver installation

Don’t connect any graphics card to motherboard before finishing OS installation; just install OS with onboard graphics.

Note: Or install OS with only one graphics card connected to PCI-Ex16 slot, other steps are same as below.


Please update BIOS to B25DF710.BSS or after version where mining mode default is enable.
The BIOS Download Page as


Follow Windows instruction to finish OS installation.


Turn off the computer; install all graphics cards properly (please refer to the hardware installation page).


Change video output to the graphics card connected to PCI-Ex16 slot (This step is for installing OS with onboard graphics only).


Power on and install motherboard drivers and graphics card drivers.


Reboot and start to mine.

Hardware Installation
Step 1.

Please install every graphics card into the riser cards (as the picture below) respectivelly.

**The power cable for riser card and power cable for graphics card must come from same power supply uint.

**The USB cable of riser card must not be connected to any the USB port on motherboard.

Step 2.

Connect 8-pin power connector and 24-pin power connector to the power supply-1.

Connect 4-pin 12V AUXPWR 1 and 4-pin 12V AUXPWR 2 to the power supply-1. Also, connect SATA cable to HDD or SSD.

* These two AUX power connectors are BIOSTAR unique design of graphics card power enhancement.

Step 3.

Connect PCI-Ex16 riser cards with graphics cards installed properly to the PCI-Ex1 riser cards installed on motherboard by USB3.0 cables.

Connect power cables to graphics card and PCI-Ex16 riser card. 6 graphics cards powered by power supply 1, another 6 graphics cards powered by power supply 2.

Step 4.

Follow the instruction below to establish a short circuit between No. 15 pin and No.16 pin on the 24-pin power connector of Power Supply 2.

Step 5.

And the last step, turn on the power supply.

**The instruction is designed with 6 Nvidia GTX1060 and 6 AMD RX470 graphics cards as example.

Step 6.

Get ready to make money with BIOSTAR Crypto Mining Motherboard!

To keep the mining rig operating stably, please install the system in an environment where there is a sufficient volume of air available to cool your rig. To top it off, you can use two industrial fans to make the air convection much efficient.

*The graphics cards connected to PCI-Ex16 slot must be powered by power supply 1.

*Each power cable from power supply is limited to be connected to 2 graphics cards or 2 PCI-Ex16 riser cards.

Blockchain Compute Optimization for AMD RX series GPU

Use following setting to set optimized Blockchain compute performance inside the driver:

  1. Open Radeon settings by double clicking the red Radeon logo (Windows main screen lower right corner)
  2. Go to “Gaming” -> “Global Settings”
  3. Choose your GPU for mining
  4. Switch “GPU Workload” from ”Graphics” to “Compute” and confirm by “Yes”.
  5. Radeon setting application will restart
  6. Start your miner

BIOSTAR PCIe X1 USB 3.0 Crypto Mining Expansion Card

USD 22.00 ---ONLY---

Product Overview Gaming in the Virtual Life & Mining in the Real World
Have you ever thought about the possibility to turn your gaming motherboard into a crypto mining base? Gaming and mining make you get achievements both in the virtual life and in the real world. The BIOSTAR Crypto Mining Card is designed for graphics card expansion to fully convert your gaming PC to a professional cryptocurrency mining rig that can handle much more graphics cards than those it could be equipped with.

Turn Your Gaming Motherboard into a Mining Base
The Crypto Mining Card with PCI-e x1 to 4 USB3.0 connectors is exclusively compatible with all BIOSTAR mining motherboards*, and select BIOSTAR gaming motherboards* and including the specific motherboards as following: RACING H170GT3, GAMING H170T, Hi-Fi H170S3H, Hi-Fi B150S1, Hi-Fi B150S1 D4, and TB150 PRO. To increase the mining profitability, this Crypto Mining Card can let mining enthusiasts set up their mining machine up to 8 slots for TB150 PRO to utilize more GPUs for more mining power**. Moreover, it can return your investment on your system by giving you the flexibility to create a mining rig to generate income from mining popular cryptocurrency like Bitcoin, Ethereum or Zcash.

Maximum Total Graphics Cards for Mining When Used Inconjunction with the Crypto Mining Card:
• Racing H170GT3 + Crypto Mining Card = Up to 7 Graphics Cards.
• GAMING H170T + Crypto Mining Card = Up to 7 Graphics Cards.
• Hi-Fi H170S3H + Crypto Mining Card = Up to 7 Graphics Cards.
• Hi-Fi B150S1 + Crypto Mining Card = Up to 6 Graphics Cards.
• Hi-Fi B150S104 + Crypto Mining Card = Up to 6 Graphics Cards.
• TB150 PRO + Crypto Mining Card = Up to 8 Graphics Cards. Features • BIOSTAR Crypto Mining Card turns you gaming machine crypto currency mining system, or expands your existing mining setup.
• Exclusively compatible with all BIOSTAR Mining Motherboards* & select BIOSTAR Gaming Motherboards*.
• Converts one PCIe x1 slot into four USB 3.0 PCIe connectors, so you can connect up to four USB PCIe riser cards**.
• Gives you the flexibility to use existing hardware to start Crypto mining, or increase the number of graphics cards in your current mining rig for maximum profitability.
• Powered by 1x 4-pin Molex Peripheral Connector.


Biostar TB360-BTC D+ Mining Motherboard

USD 193.00 ---ONLY---

About this item

  • LGA 1151 Supports 8th and 9th Generation Intel Core Processor
  • Intel B360 single chip architecture
  • Supports SO-DIMM DDR4-2133/2400/2666 up to 16GB Memory
  • Supports 8 x PCIe x16 slots (50mm between X16 slots)
  • Supports M.2 (16Gb/s) Connector
  • Motherboard Dimensions 19.1 Inch x 9.25 Inch ( W x L )
  • This motherboard has NO 24 pin ATX power supply connector it uses eight 6 pin PCIe connectors for power and has 8 PCIe connectors as outputs to power GPU’s. If using a ATX power supply you will need a 24 pin jumper to start the power supply.
  • Your CPU MUST have intergrated graphics. HDMI cable must be plugged into on board HDMI. This can be changed later in the BIOS if desired.

Biostar TB360-BTC PRO 12 GPU Mining Motherboard

USD 210.00 ---ONLY---

About this item

  • Supports 9th & 8th Generation Intel Core Processor
  • Intel B360 single chip architecture
  • Support 2-DIMM DDR4-1866/2133/2400/2666 up to 32G maximum capacity
  • Support M.2 Sata III (6Gb/s) Connector


USD 2.50 ---ONLY---

1m USB 3.0 A Male to A Male Cable (3.2ft) – 3.20 ft USB Data Transfer Cable for Hard Disk Drive Enclosure, Printer, Modem, Camera – First End: 1 x Type A Male USB – Second End: 1 x Type A Male USB


COOLER MASTER Riser Cable PCIE 3.0 X16 VER. 2

USD 25.00 ---ONLY---

Flex your Graphics Muscle

The Cooler Master Riser Cable PCIe 3.0 x16 Ver. 2 – 300mm comes revised for maximum flexibility and durability. High quality plastics grant increased cable flexibility and strength for the tightest PCI card installations, while the heavy-duty shielding prevents electromagnetic interference from degrading signal quality. A stainless steel PCI slot adds extra rigidity to the riser to support even the largest and heaviest graphics cards. The IPC4101D compliant PCB provides the best in class performance under high thermal loads and cable flex than any of the non-compliant competitor riser cables in the market.

Ultra Durable PCB

Ultra Durable PCB

The IPC4101D compliant PCB provides the best in class performance under high thermal loads, cable flex, and moisture resistance than any of the non-compliant competitor riser cables in the market.

Heavy duty shielding

Heavy duty shielding

EMI shielded 28/30 AWG copper wires ensure minimal signal delay and electromagnetic interference-free operation.

Gold pin connections

Gold pin connections

Gold PCI pins allow maximum electrical conductivity with a rated 110g of insertion force per contact pair for high durability.

Protective ABS casing

Protective ABS casing

UV resistant ABS casing protects cable connection points from rough handling.

Freely express yourself: Download the 3d printable files (.stl) and create your own customized design.

Stainless steel-reinforced PCI slot

Stainless steel-reinforced PCI slot

Nickel-plated stainless steel PCI slot adds rigidity for superior card retention for even the heaviest PCI card installations.

Ultra-flexible cable sleeves

Ultra-flexible cable sleeves

TPE cable sleeves allow for maximum flexibility and durability for the tightest cable routing jobs.

Cooler Master V1300 Platinum 1300W Full-Modular

USD 298.00 ---ONLY---
Connectors 1 x ATX 24 pin
1 x EPS 4+4 pin
1 x EPS 8 pin
12 x PCI-e 6+2 pin
16 x SATA 15 pin
8 x Peripheral 4 pin
1 x Floppy 4 pin
Features 80 PLUS Platinum Certification: Guarantees a typical efficiency of 92% under normal operating conditions.

Thermal Regulation Mode (TRM) : Regulates temps, keeping a constant and quiet fan speed up to 60% of maximum load.

Performance Driven Topology : Full-bridge LLC offer reliable and stable voltage outputs for safer, more reliable performance and higher efficiency.

Single/Multi-Rail Switch : Built in rail switch allows users to change between multi and single rail power output settings.

16 AWG PCI-e Cables : Thicker 16 AWG PCI-e cables for higher currents, improving efficiency and safety.

  • 80 PLUS Platinum Certification: Guarantees a typical efficiency of 92% under normal operating conditions.
  • Thermal Regulation Mode (TRM) : Regulates temps, keeping a constant and quiet fan speed up to 60% of maximum load.
  • Performance Driven Topology : Full-bridge LLC offer reliable and stable voltage outputs for safer, more reliable performance and higher efficiency.
  • Single/Multi-Rail Switch : Built in rail switch allows users to change between multi and single rail power output settings.
  • 16 AWG PCI-e Cables : Thicker 16 AWG PCI-e cables for higher currents, improving efficiency and safety.

Cooler MasterAccessory Riser Cable PCIe 4.0 x16 – 300mm

USD 59.00 ---ONLY---

Showcase your graphics card

With the Cooler MasterAccessory Riser Cable PCIe 4.0 x16 – 300mm

, you can showcase your graphics card by installing it in a vertical position in your compatible windowed case. Features :

  • PCI-Express 4.0 16x interface
  • Backward compatible with 2.0 and 3.0 standards
  • Length: 300 mm
  • Protected against electromagnetic interference

Dual 24-Pin ATX Power Supply Motherboard Adapter Cable for Using Two PSU’s by Cryptosaur Gear MINING

USD 5.00 ---ONLY---

no warranty on all mining parts and we are not responsible for any damage caused from using this item !!!!!

About this item

  • PSU Splitter Run Two Power Supplies with One cable.
  • No 24-Pin jumper needed. Power Supplies turn on at the same time.
  • 30cm Length 18AWG Cable.
  • Two Female 24-Pin ATX attachments for each PSU’s 24-Pin Male cable.
  • 1 Male 24-Pin ATX end for attachment to your Motherboard.

HDMI Dummy Plug,Headless Ghost, Display Emulator

USD 4.00 ---ONLY---
  •  Will work with any graphics card that has HDMI output. No incompatibility problems, if regular LCD monitor works with particular output then these dummy plugs will also work with 100% confidence as they act exactly the same as real LCD monitor.
  •  Works with Windows, OSX, Linux and just about everything else Ultra-compact, low profile design
  •  No drivers, no configuration, no power cable – just set and forget
  •  Allows for high resolution, GPU accelerated remote desktop
  •  Acts as a dummy plug for use with GPU tasks such as crypto currency mining Works great with Virtual Desktop on Oculus Rift & HTC Vive (HDMI4K,VGA,DVI,DP,MINIDP)HEADLESS,(HDMI ,VGA,DVI)PASS-THROUGH EDID PLEASE ENTER THE STORE TO PURCHASE

Intel Pentium Gold G-6400 LGA1200 2 Cores 4.0 GHz

USD 80.00 ---ONLY---


Product Collection Intel® Pentium® Gold Processor Series
Code Name Products formerly Comet Lake
Vertical Segment Desktop
Processor Number G6400
Lithography 14 nm
Use Conditions PC/Client/Tablet
Performance Specifications 
Cores 2
Threads 4
Processor Base Frequency 4.00 GHz
Cache 4MB Intel® Smart Cache
Bus Speed 8 GT/s
TDP 58 W
Supplemental Information 
Embedded Options Available No
Memory Specifications 
Max Memory Size (dependent on memory type) 128 GB
Memory Types DDR4-2666
Max # of Memory Channels 2
Max Memory Bandwidth 41.6 GB/s
ECC Memory Supported No
Processor Graphics 
Processor Graphics Intel® UHD Graphics 610
Graphics Base Frequency 350 MHz
Graphics Max Dynamic Frequency 1.05 GHz
Graphics Video Max Memory 64 GB
4K Support Yes, at 60Hz
Max Resolution (HDMI) 4096×[email protected]
Max Resolution (DP) 4096×[email protected]
Max Resolution (eDP – Integrated Flat Panel) 4096×[email protected]
DirectX* Support 12
OpenGL* Support 4.5
Intel® Quick Sync Video Yes
Intel® InTru™ 3D Technology Yes
Intel® Clear Video HD Technology Yes
Intel® Clear Video Technology Yes
Displays Supported 3
Device ID 0x9BA8
Expansion Options 
Scalability 1S Only
PCI Express Revision 3.0
PCI Express Configurations Up to 1×16, 2×8, 1×8+2×4
Max # of PCI Express Lanes 16
Package Specifications 
Sockets Supported FCLGA1200
Max CPU Configuration 1
Thermal Solution Specification PCG 2015D
Package Size 37.5mm x 37.5mm
Advanced Technologies 
Intel® Optane™ Memory Supported Yes
Intel® Thermal Velocity Boost No
Intel® Turbo Boost Max Technology 3.0 No
Intel® Turbo Boost Technology No
Intel vPro® Platform Eligibility No
Intel® Hyper-Threading Technology Yes
Intel® Virtualization Technology (VT-x) Yes
Intel® Virtualization Technology for Directed I/O (VT-d) Yes
Intel® VT-x with Extended Page Tables (EPT) Yes
Intel® Transactional Synchronization Extensions No
Intel® 64 Yes
nstruction Set 64-bit
Instruction Set Extensions Intel® SSE4.1, Intel® SSE4.2
Idle States Yes
Enhanced Intel SpeedStep® Technology Yes
Thermal Monitoring Technologies Yes
Intel® Identity Protection Technology Yes
Intel® Stable Image Platform Program (SIPP) No
Security & Reliability 
Intel® AES New Instructions Yes
Secure Key Yes
Intel® Software Guard Extensions (Intel® SGX) Yes with Intel® ME
Intel® OS Guard Yes
Intel® Trusted Execution Technology No
Execute Disable Bit Yes
Intel® Boot Guard Yes
Warranty 3 Years
Note ***Features, Price and Specifications are subject to change without notice.

Mining 24 Pin TO CONNECT 2 Dual Power Supply

USD 6.00 ---ONLY---

no warranty on all mining parts and we are not responsible for any damage caused from using this item !!!!!

NEW PCI-E Pcie Riser 009C Plus LED Riser FOR MINING

USD 6.50 ---ONLY---

VER009C-PLUS PCIE Pcie Riser 009C Plus LED Riser Express Adapter Dual 6Pin Card SATA to USB 3.0 Extension Cable X16


PCIe 1 to 4 PCI-Express Card for Bitcoin Miner

USD 20.00 ---ONLY---

PCIe 1 to 4 PCI-Express 16X Slots Riser Card PCI-E 1X to External 4 PCI-e USB 3.0 Adapter Multiplier Card for Bitcoin Miner

  • Bus interface: PCI-E X1 (compatible with X4, X8, X16 slot)
  • Reduce the number of adapter and transfer line, one line directly to the interface, effectively reduce the interface interference and wire loss, to ensure data reliability, so as to improve work efficiency!
  • The main control panel uses PCI-E interface direct power supply mode, and no external power line is needed, so that the main board power is free from external interference, and the stability is higher!
  • Effectively solve the motherboard PCI-E interface is not enough, an interface can be extended out of 4;
  • The use of plug-in design, not through the extension line directly inserted into the motherboard interface, and can be fixed to the chassis, stability and reliability greatly improved!

PCIE GPU VGA Cable 8 FEMALEE to 2 x 8-Pin Sleeved

USD 5.00 ---ONLY---

About this item

  • 『Solution』Convenient solution for adding two extra PCI Express ports to your existing power supply;
  • 『PCIe 8P female – Dual 8P(6+2)』The 8 pin PCIe female end to plug into the PCIe 8 pin male cable of the non-modular or semi-modular power supply and two 8 pin (6+2) male ends to plug into the video graphics card;
  • 『Compatibility』Compatible with common non-modular PSUs and semi-modular PSUs with PCIe 8 pin male cable; (Note: It does not work with Fully-modular PSUs.)
  • 『Compatibility』Compatible with 6-pin & 8-pin graphics cards from popular manufacturers such as: ASUS, ASRock, EVGA, Gigabyte, Radeon, Sapphire, NVIDIA Tesla GPU, etc. (The 8 pin (6+2) ends could be used as 6 pin or 8 pin end by sliding on/off the 2 pin.);
  • 『Parameter』Length(including the connectors): 9-inch(23cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs, Self-adhesive tape*1pcs;

PCIe Riser Mining Card,Awakingdemi NGFF M.2 to USB 3.0

USD 4.00 ---ONLY---
  • he main control board uses the direct power supply mode of PCI-E interface, and does not need to connect the power line again
  • The card slot is imported to ensure a better connection.
  • A high quality connector is used for the card slot to make the card contact well.
  • Multi layer shielded wire for PCI-E connector.
  • The PCI-E connector is relatively wear-resistant and increases electrical conductivity.

Power SW Motherboard Cable for PC

USD 1.00 ---ONLY---

Power SW Motherboard Cable for PC Power Switch Button


  • Replace a broken power switch/cable on a desktop PC
  • Length: 60cm / 23in
  • Fits onto the motherboard’s power switch (Power SW) headers
  • Great item for case mods and custom on/off buttons!


USD 6.00 ---ONLY---


Riser Card Extender PCI Express 009S PLUS

USD 6.00 ---ONLY---

VER 009S PLUS For Bitcoin Miner With 3 LED Lights PCI-E Adapter Gold Plated USB 3.0 1X to 16X 6 PIN

Quick Details
ce, RoHS
Products Status:
Brand Name:
Place of Origin:
Product name:
009s riser card
PCI-E 1X to 16X Riser Cable
009s red
pp bag

Riser MINING Card USB 3.0 V011-Pro PCI-E 1x To 16x

USD 7.00 ---ONLY---

Riser Card Adapter USB 3.0 V011-Pro PCI-E 1x To 16x Riser Card

  • PCI-E 1X to 16X Riser Card: V011-PRO Version PCIe riser Card are the best solution for setting up Ethereum/Bitcoin and other GPU mining rigs.  At the same time used with (ASIN:B094FRYRB3) can provide fast data transmission speed.
  • 10 capacitors, safer!: The graphics card power supply adopts 10 imported large solid capacitors to make the graphics card power supply more stable and safe.
  • Multi-interface power supply: Dual 6PIN port power supply makes the power supply of the graphics card independent of the motherboard, thereby reducing the burden on the motherboard when connecting multiple graphics cards.
  • Rugged Cable: 60 cm USB 3.0 cable for flexible placement of PCI-E devices. The PCI-E connector uses multi-layer shielded wire, which can be connected up to 3M without signal attenuation.
  • Support System: compatible with all WINDOWS systems, LINUX, MAC

This is latest version yet of Riser Card Adapter USB 3.0 V011-Pro PCI-E 1x To 16x Riser Card

Also check:


USD 9.50 ---ONLY---

Product description analysis:
1. The graphics card uses 8 FP solid capacitors for power supply. Anti-burn machine chip. Make the graphics card work more stable.
2. Add 3 LED indicators
3. Gold-plated USB3.0 interface, running faster and more stable
4. The adapter card is powered separately, so that the power supply of the graphics card is independent from the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected.
5. The graphics card slot adopts the original imported connector to make the graphics card contact better.
6. The PCI-E connector uses multi-layer shielded wire
7. The wire is relatively soft, easy to route, and the graphics card can be placed at will.
8. The slot is equipped with a fixed buckle, which is convenient to remove and fix the graphics card, so that the graphics card will not fall off from the slot.



USD 12.00 ---ONLY---

This is a WiFi Smart Switch with the DIY capability that makes it possible to control connected devices via the eWeLink directly from your phone, or ask it to turn on/off devices with Amazon Alexa and Google Assistant. Amazingly, it has a DIY mode that is the firmware can be user-defined. Built-in a web server that exposes the REST API, which allows you to connect the switch with your existing home automation system. Compatible with HomeSeer, Home Assistant, etc,

Simply set a timer to let your devices switch on/off automatically at a pre-set time through a day. For example, prepare your coffee maker in the evening, and a cup of coffee is ready for you in the next morning. Compatible with the IFTTT function, and you can make more actions happen to trigger other devices, or receive a notification on your phone once the action was triggered.

Along with support for smart scenes, just set a device to turn on/off to make another or a boatload of devices turn on/off. The LAN control is designed for situations which no available Wi-Fi connection, or an unsteady Wi-Fi network environment. A convenient option that is share control is capable of allowing you to manage the same device with your family or friends together, simply share it on the eWeLink app to try.

Note: BASICR3 does not have 433Mhz RF receiver module. The router must be a 2.4GHz device (5.0GHz WLAN is not supported), but there is no limitation for the smartphone network (2G/3G/4G/Wi-Fi are all compatible).


  • Max Current: 10A
  • Max Power: 2200W
  • Power Supply: AC 100-240V
  • Switch Channel: Single
  • Wireless Standard: IEEE 802.11 b/g/n 2.4GHz
  • Enclosure Material: PC V0
  • DIY Mode: Yes
  • Works With: Amazon Alexa, Google Assistant, Samsung Smarthings, Yandex Alice
  • Dimensions: 91 x 43 x 25 mm
  • Certified Compliance: CE, FCC


USD 4.00 ---ONLY---
  1. Black sleeved 3 way PWM splitter hub for computer fans
  2. Designed for the need to control numerous system fans
  3. Capable of expanding one motherboard PWM fan header to support up to four fans
  4. Support PWM Function, Speed control, satisfy your control needs
  5. Compatible with 3-pin / 4-pin Fans
Scroll To Top